Use of a Spectralon panel to measure the downwelling irradiance signal: case studies and recommendations

Appl Opt. 2004 Nov 10;43(32):5981-6. doi: 10.1364/ao.43.005981.

Abstract

Field determinations of the remote sensing reflectance signal are necessary to validate ocean color satellite sensors. The measurement of the above-water downwelling irradiance signal Ed(0+) is commonly made with a reference plaque of a known reflectance. The radiance reflected by the plaque (L(dspec)) can be used to determine Ed(0+) if the plaque is assumed to be near Lambertian. To test this assumption, basic experiments were conducted on a boat under changing sky conditions (clear, cloudy, covered) and with different configurations for simultaneous measurements of L(dspec) and Ed(0+). For all measurement configurations, results were satisfactory under a clear sky. Under cloudy or covered skies, shadow effects on the plaque induced errors up to 100% in the determination of Ed(0+). An appropriate measurement configuration was defined, which enabled Ed(0+) to be determined with an accuracy of better than +/- 15% regardless of the sky conditions.