By combining isoelectric focusing (IEF) with subsequent gel electrophoresis, two-dimensional electrophoresis (2DE) affords more specific characterization of proteins than each constituent unit separation. In a new approach to integrating the two assay dimensions in a microscope slide-sized glass device, we introduce microfluidic 2DE using photopatterned polyacrylamide (PA) gel elements housed in a millimeter-scale, 20-μm-deep chamber. The microchamber minimizes information loss inherent to channel network architectures commonly used for microfluidic 2DE. To define the IEF axis along a "lane" at the top of the chamber, we used free solution carrier ampholytes and immobilized acrylamido buffers in the PA gels. This approach yielded high-resolution (0.1 pH unit) and rapid (<20 min) IEF. Next, protein transfer to the second dimension was accomplished by chemical mobilization perpendicular to the IEF axis. Mobilization drove focused proteins off the IEF lane and into a region for protein gel electrophoresis. Using fluorescently labeled proteins, we observed transfer-induced band broadening factors ~7.5-fold lower than those observed in microchannel networks. Both native polyacrylamide gel electrophoresis (PAGE) and pore-limit electrophoresis (PLE) were studied as the second assay dimension and completed in <15 min. PLE yields protein molecular mass information without the need for ionic surfactant or reducing agents, simplifying device design and operation. Microchamber-based 2DE unifies two independent separation dimensions in a single device with minimal transfer-associated information losses. Peak capacities for the total assay ranged from 256 to 35 with <1 h assay duration. The rapid microchamber 2DE assay has the potential to bridge an existing gap in targeted proteomics for protein biomarker validation and systems biology that may complement recent innovation in mass spectrometry.