Invasive radiologic management of hemodialysis fistulas: measuring flow with an endovascular catheter

Abstract

Objectives: To analyze the values of flow obtained with an endovascular catheter, and to determine whether they are more reliable than angiographic and clinical findings for planning and for determining the outcome of invasive radiologic treatment of hemodialysis fistulas, as well as to determine the safety of this technique during interventional radiology procedures.

Material and methods: We used endovascular catheters to measure flow in 341 vascular accesses for hemodialysis (162 [47.6%] distal fistulas, 132 [38.4%] humeral fistulas, and 47 [14%] arteriovenous grafts) in 598 procedures (a total of 3,051 flow measurements). Dysfunction was most commonly due to high pressures and flow deficits.

Results: The catheter was used to measure the results of radiologic treatment in 419 (70%) cases and only to measure the control of flow in the hemodialysis access in 179 (30%) cases. In the cases where lesions of the access had been treated radiologically, the flow improved by a mean of 1,232ml/min. In 2 (0.35%) cases, the tip of the catheter perforated the wall of the vein; this complication was resolved by inflating a low pressure balloon.

Conclusions: Endovascular catheters are useful for measuring flow in invasive vascular radiology procedures for hemodialysis. In assessing the hemodynamic status of a vascular access, they are most helpful in determining whether stenosis is present.

Keywords: Acceso vascular; Angioplastia; Angioplasty; Flujo vascular; Hemodialysis; Hemodiálisis; Termodilución; Thermodilution; Ultrasonografía; Ultrasonography; Vascular access; Vascular flow.