Developing a rapid fabrication method for crack-free opal films is a significant challenge with broad applications. We developed a microfluidic platform known as the "filter paper-enhanced evaporation microfluidic chip" (FPEE-chip) for the fabrication of photonic crystal and inverse opal hydrogel (IOPH) films. The chip featured a thin channel formed by bonding double-sided adhesive poly(ethylene terephthalate) with a polymethyl methacrylate cover and a glass substrate. This channel was then filled with nanosphere colloids. The water was guided to evaporate rapidly at the surface of the filter paper, allowing the nanospheres to self-assemble and accumulate within the channel under capillary forces. Experimental results confirmed that the self-assembly method based on the FPEE-chip was a rapid platform for producing high-quality opal, with centimeter-sized opal films achievable in less than an hour. Furthermore, the filter paper altered the stress release mechanism of the opal films during drying, resulting in fewer cracks. This platform was proven capable of producing large-grain, crack-free opal films of up to 30 mm2 in size. We also fabricated crack-free IOPH pH sensors that exhibited color and size responsiveness to pH changes. The coefficient of variation of the gray color distribution for crack-free IOPH ranged from 0.03 to 0.07, which was lower than that of cracked IOPH (ranging from 0.07 to 0.14). Additionally, the grayscale peak value in 1 mm2 of the crack-free IOPH was more than twice that of the cracked IOPH at the same pH. The FPEE-chip demonstrated potential as a candidate for developing vision sensors.