UraniumVI sorption experiments involving quartz and clinoptilolite, important mineral phases at the proposed US nuclear waste repository at Yucca Mountain, NV, were conducted to evaluate the ability of surface complexation models to predict UVI sorption onto mineral mixtures based on parameters derived from single-mineral experiments. The experiments were conducted at an initial UVI aqueous concentration of approximately 2.0 x 10(-7) mol.l-1 (0.1 mol.l-1 NaNO3 matrix) and over the pH range approximately 2.5 to approximately 9.5. The UVI solutions were reacted with either quartz or clinoptilolite only, or with mixtures of the two minerals. The experiments were carried out under atmospheric pCO2(g) conditions (in loosely capped containers) or under limited pCO2(g) (in capped containers or in a glove box). Data from sorption experiments on quartz at atmospheric pCO2 conditions were used to derive UVI binding constants for a diffuse-layer surface complexation model (DLM). The DLM was then used with surface area as a scaling factor to predict sorption of UVI onto clinoptilolite and clinoptilolite/quartz mixtures under both atmospheric and low pCO2 conditions. The calculations reproduced many aspects of the pH-dependent sorption behavior. If this approach can be demonstrated for natural mineral assemblages, it may be useful as a relatively simple method for improving radionuclide transport models in performance-assessment calculations.