Transfer of chemicals from contaminated surfaces such as foliage, floors, and furniture is a potentially significant source of both occupational exposure and children's residential exposure. Increased understanding of relevant factors influencing transfers from contaminated surfaces to skin and resulting dermal-loading will reduce uncertainty in exposure assessment. In a previously reported study, a fluorescence imaging system was developed, tested, and used to measure transfer of riboflavin residues from surfaces to hands. Parameters evaluated included surface type, surface loading, contact motion, pressure, duration, and skin condition. Results of the initial study indicated that contact duration and pressure were not significant for the range of values tested, but that there are potentially significant differences in transfer efficiencies of different compounds. In the study reported here, experimental methods were refined and additional transfer data were collected. A second fluorescent tracer, Uvitex OB, with very different physicochemical properties than riboflavin, was also evaluated to better characterize the range of transfers that may be expected for a variety of compounds. Fluorescent tracers were applied individually to surfaces and transfers to skin were measured after repeated hand contacts with the surface. Additional trials were conducted to compare transfer of tracers and co-applied pesticide residues. Results of this study indicate that dermal loadings of both tracers increase through the seventh brief contact. Dermal loading of Uvitex tends to increase at a higher rate than dermal loadings of riboflavin. Measurement of co-applied tracer and pesticide suggest results for these two tracers may provide reasonable bounding estimates of pesticide transfer.