A detailed design for a simple and inexpensive variable-speed (1.0-5.8 m s-1) pneumatic plunge-freezing device is presented. Cultured cells, grown on Formvar-coated 75-mesh gold finder grids, are pneumatically driven into a stirring mixture of propane/isopentane (3:1) cooled by liquid nitrogen (LN2). Premature freezing of the sample in the cryogenic vapors above the cryogen is prevented by plunging through an entry tube into an insulating box, to which a partial vacuum is applied. The cryogenic vapors are drafted into the box at the level of the liquid cryogen by the vacuum, thereby preventing a layer of cold gas from collecting above the cryogen. To prevent the sample from thawing during transfer from the cryogen to the substitution medium, the box top is removed and compressed air is forced through a corrugated tube running the length of the box. The resulting boiling LN2 creates an atmosphere below -120 degrees C in which the transfer can be accomplished.