Comparability of Icare Pro Rebound Tonometer with Goldmann Applanation and Noncontact Tonometer in a Wide Range of Intraocular Pressure and Central Corneal Thickness

Ophthalmic Res. 2015;54(1):18-25. doi: 10.1159/000381781. Epub 2015 May 28.

Abstract

Purpose: To evaluate the agreement between the reading values of the Goldmann applanation tonometer (GAT), Icare Pro rebound tonometer (IRT) and noncontact tonometer (NCT) in glaucoma patients.

Methods: This cross-sectional study comprised 292 eyes of 292 patients selected from a glaucoma outpatient clinic. The intraocular pressure (IOP) was measured sequentially, at a 10-min interval each, in the following order: NCT, IRT and GAT. The central corneal thickness (CCT) was measured using Pentacam HR before the IOP measurements.

Results: The mean IOPs measured by the GAT, NCT and IRT were 20.17 ± 6.73 mm Hg (range: 4-48), 19.77 ± 6.88 mm Hg (range: 3-46) and 19.30 ± 5.15 mm Hg (range: 7.30-44.5), respectively. The correlation coefficients of the GAT and IRT, NCT and IRT, and GAT and NCT measurements were r(2) = 0.673, r(2) = 0.663 and r(2) = 0.938 (all p < 0.001), respectively. The IRT tends to overestimate in the low GAT-measured IOPs, whereas it underestimates in high GAT-measured IOPs. The measurements of all 3 devices were also correlated with the CCT at a statistically significant level (GAT: r(2) = 0.063, NCT: r(2) = 0.063, IRT: r(2) = 0.058).

Conclusion: The agreement between the IRT and GAT measurements is higher in the IOP range of 9-22 mm Hg, whereas significant discrepancies occur as the IOP deviates from normal values. The variability of the IRT and GAT measurements over a wide range of CCT is minimal.

Publication types

  • Comparative Study

MeSH terms

  • Aged
  • Cross-Sectional Studies
  • Female
  • Glaucoma / diagnosis*
  • Humans
  • Intraocular Pressure / physiology
  • Male
  • Middle Aged
  • Ocular Hypertension / diagnosis*
  • Prospective Studies
  • Regression Analysis
  • Reproducibility of Results
  • Tonometry, Ocular / instrumentation*