A Co-driven Functional Electrical Stimulation Control Strategy by Dynamic Surface Electromyography and Joint Angle

Rui Xu; Xinyu Zhao; Ziyao Wang; Hengyu Zhang; Lin Meng; Dong Ming

doi:10.3389/fnins.2022.909602

A Co-driven Functional Electrical Stimulation Control Strategy by Dynamic Surface Electromyography and Joint Angle

Front Neurosci. 2022 Jul 8:16:909602. doi: 10.3389/fnins.2022.909602. eCollection 2022.

Authors

Rui Xu^{1

2}, Xinyu Zhao¹, Ziyao Wang¹, Hengyu Zhang¹, Lin Meng¹, Dong Ming^{1

2}

Affiliations

¹ Laboratory of Motor Rehabilitation, Academy of Medical Engineering and Translational Medicine, Tianjin University, Tianjin, China.
² College of Precision Instruments and Optoelectronics Engineering, Tianjin University, Tianjin, China.

Abstract

Functional electrical stimulation (FES) is widely used in neurorehabilitation to improve patients' motion ability. It has been verified to promote neural remodeling and relearning, during which FES has to produce an accurate movement to obtain a good efficacy. Therefore, many studies have focused on the relationship between FES parameters and the generated movements. However, most of the relationships have been established in static contractions, which leads to an unsatisfactory result when applied to dynamic conditions. Therefore, this study proposed a FES control strategy based on the surface electromyography (sEMG) and kinematic information during dynamic contractions. The pulse width (PW) of FES was determined by a direct transfer function (DTF) with sEMG features and joint angles as the input. The DTF was established by combing the polynomial transfer functions of sEMG and joint torque and the polynomial transfer functions of joint torque and FES. Moreover, the PW of two FES channels was set based on the muscle synergy ratio obtained through sEMG. A total of six healthy right-handed subjects were recruited in this experiment to verify the validity of the strategy. The PW of FES applied to the left arm was evaluated based on the sEMG of the right extensor carpi radialis (ECR) and the right wrist angle. The coefficient of determination (R ²) and the normalized root mean square error (NRMSE) of FES-included and voluntary wrist angles and torques were used to verify the performance of the strategy. The result showed that this study achieved a high accuracy (R ² = 0.965 and NRMSE = 0.047) of joint angle and a good accuracy (R ² = 0.701 and NRMSE = 0.241) of joint torque reproduction during dynamic movements. Moreover, the DTF in real-time FES system also had a nice performance of joint angle fitting (R ² = 0.940 and NRMSE = 0.071) and joint torque fitting (R ² = 0.607 and NRMSE = 0.303). It is concluded that the proposed strategy is able to generate proper FES parameters based on sEMG and kinematic information for dynamic movement reproduction and can be used in a real-time FES system combined with bilateral movements for better rehabilitation.

Keywords: functional electrical stimulation; joint torque control; kinematics; polynomial fitting; surface electromyography.