Microplastics removal efficiency and risk analysis of wastewater treatment plants in Oman

Chemosphere. 2024 Jul:359:142206. doi: 10.1016/j.chemosphere.2024.142206. Epub 2024 May 4.

Abstract

Microplastics (MPs) have recently been documented as an emerging pollutant that poses a critical threat to environment. Wastewater treatment plants (WWTPs) are commonly regarded as significant contributors to the presence of MPs. This study aimed to assess the MPs load of three wastewater treatment facilities in Oman using various treatments, including MBR, SBR, and CAS. Wastewater samples from influent, effluent, and sludge were collected and analyzed to determine the concentration, morphology, size, color, and polymer type of the MPs. A set of sieves with a mesh size range of 1 mm-45 μm was used to for filtration. Oxidation treatment was applied for all samples using Fenton's reagent, followed by density separation by sodium chloride solution. The Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR- FTIR) method was utilized to test 10% from each sampling point to confirm the polymer types of the MPs. The pollution load index (PLI) and hazard index (HI) have been employed to assess the risk associated with the chemical toxicity and concentration of detected particles. The PROMETHEE method was used to rank the risk of sampling sites based on different criteria that posed potential ecological and human health risks. The results indicate that the average concentrations of 0.99 MP/L, 1.38 MP/L, and 0.93 MP/L were detected in the final treated effluent of WWTP A, WWTP B, and WWTP C, respectively. These concentrations correspond to overall removal efficiencies of 82.5%, 77.4%, and 79.2% for WWTP A, WWTP B, and WWTP C, respectively Most MPs found in tertiary effluent were smaller particles (425 μm) and fiber-shaped. The major types of MPs were polypropylene (PP), low-density polyethylene (LDPE), polyurethane (PU), polyethylene terephthalate (PET), and Polyvinyl chloride (PVC). This study showed that treated effluent and sludge release significant MPs into the environment.

Keywords: Emerging pollutants; Microplastics; PROMETHEE method; Plastic polymers; Wastewater treatment technologies.

MeSH terms

  • Environmental Monitoring
  • Microplastics* / analysis
  • Oman
  • Risk Assessment
  • Sewage / analysis
  • Sewage / chemistry
  • Waste Disposal, Fluid* / methods
  • Wastewater* / chemistry
  • Water Pollutants, Chemical* / analysis

Substances

  • Wastewater
  • Water Pollutants, Chemical
  • Microplastics
  • Sewage